Smash Repairs Richmond

Car body panel names, from bonnet to quarter panel

From front to back, the main car body panel names are the front bumper cover, bonnet, front guards, doors, pillars, roof, sills, rear quarter panels, boot lid or tailgate, and rear bumper cover. Australian names differ from the American ones online: a guard is a fender in the US, a bonnet is a hood, a boot is a trunk and a sill is a rocker panel. Some of these panels bolt on and some are welded into the body, and that changes how damage to each one is fixed.

Say a bollard in a Richmond car park caught the back of your car, and the repair note mentions the rear quarter panel. If you are not sure which part that is, the diagram below labels every panel on the list.

Bumper cover, bonnet and front guards at the front

Front three-quarter detail showing a silver car bonnet, front guard, headlamp and bumper cover.

The front of a car has three main outer parts. Each one has its own name on a repair note or an insurance assessment.

The gaps between these parts show where one stops and the next starts. A front guard meets the bonnet along its top edge, the bumper cover at the front corner and the front door at the back. Knowing those joins makes it easier to tell which part a scrape has touched.

  • Front bumper cover. The painted plastic cover across the very front of the car. It is the visible outer skin of the bumper.
  • Bonnet. The hinged lid at the front that lifts to open the engine bay. It runs from the base of the windscreen forward to the front of the car.
  • Front guards. The panels on either side of the bonnet. Each one wraps over a front wheel and runs back to the front door.

Doors, pillars and sills along the sides

Fixed B pillar, door hinge mounts and continuous sill exposed with the side doors removed.

The doors are hinged panels that open into the cabin. On a repair note they are named by position, such as front left door or rear right door.

Around the doors sit the pillars, the upright parts of the body that hold up the roof. They are named by letter, from the front of the car to the back:

  • The A pillar sits either side of the windscreen and runs up to the roof.
  • The B pillar stands between the front and rear doors.
  • The C pillar sits behind the rear doors and runs up to the roof beside the rear window.

Under each side of the car is the sill, the narrow panel below the doors that runs between the front and rear wheel arches. Pillars and sills form part of the body’s frame around the cabin. They stay where they are when the doors open, and the doors close against them.

Roof, rear quarter panels and boot lid at the back

Rear quarter panel around a wheel arch beneath the C pillar, beside the boot lid and tail lamp.

The roof is the large panel across the top of the cabin, carried by the pillars on each side.

Rear quarter panels are the panels on each side at the back of the car, behind the rear doors. Each one wraps around a rear wheel arch and runs back to the tail lights and the rear bumper cover. It is part of the body side rather than a separate part, so it has no gaps around it the way a door does.

That position is why the name confuses people. A rear quarter panel sits over the back wheel in the same way a front guard sits over the front wheel, so it is easy to call it a rear guard. The difference is how they are fitted. A front guard usually bolts on, while a rear quarter panel is usually part of the welded body.

At the very back is the boot lid on a sedan, or the tailgate on a hatchback, wagon or SUV. Both are hinged panels that lift to open the luggage area. Below them sits the rear bumper cover, the plastic cover across the back of the car.

Which panels bolt on and which are welded

Removed silver bonnet resting on a padded panel stand beside a sedan in a bodyshop.

Outer panels are fitted to a car in one of two ways. Some are bolted or hinged onto the car and can be taken off. Others are welded into the body when the car is built and stay part of its shell.

Construction varies from one model to the next. The table shows how each panel is usually fitted, and a repairer can confirm how a particular car is put together.

Panel Usually fitted how What that means for the repair
Front or rear bumper cover Fitted to the body and removable Can be taken off the car to work on or refit
Bonnet Hinged and bolted on Can be unbolted and worked on off the car
Front guard Bolted on Can be unbolted, repaired and refitted
Door Hinged and bolted on Can be taken off the car to work on
Boot lid or tailgate Hinged and bolted on Can be unbolted and worked on off the car
Roof Part of the welded body Repaired in place on the car
Sill Part of the welded body Repaired in place on the car
Rear quarter panel Part of the welded body Repaired in place on the car

This is why a dent in a rear quarter panel or a sill is a bigger job than the same dent in a door. A door can come off the car and be worked on as a separate part. A welded panel stays where it is, so the repair happens on the car itself, around the panels and fittings next to it.

Whether a damaged panel should be repaired or replaced is a separate decision, made panel by panel. There is more on how the repair or replace call gets made, including what a panel beater checks first.

Naming the damaged panel when you call

Panel beater showing a car owner a small dent in the rear quarter panel above the wheel arch.

Panel names make damage much easier to describe on the phone or in an email. “Rear right quarter panel, just above the wheel arch” tells a repairer far more than “a dent near the back”. Give left and right as if you are sitting in the driver’s seat, so nobody is looking at the wrong side. If you take photos, include one of the whole side of the car as well as close-ups. A wide shot shows how far the damage runs and whether it crosses a join onto the next panel.

Automotive Panel Service is a panel beater on Murphy Street in Richmond, and the details of its panel beating service are on its website. Once you know which panels are affected and have a photo of the whole side, you can request a quote and name each panel in your message.

    Comments are closed

    Smash Repairs Richmond
    trading hours
    • MONDAY - FRIDAY
      8:00 AM - 5:30 PM
    • SATURDAY
      BY APPOINTMENT
    • SUNDAY
      CLOSED
    © 2026 AUTOMOTIVE PANEL SERVICES. ALL RIGHTS RESERVED | ABN: 51 692 729 043